The use of electronic truck scale is as follows:
1. The department scale room of the electronic truck scale should be equipped with full-time personnel to operate and hold qualification certificates.
2. Division scale personnel to be familiar with the relevant knowledge of electronic truck scale, the correct operation of electronic truck scale.
3. The electronic truck scale should be used within the verification cycle.
4. Before using the electronic truck scale, the machine should be preheated for about 30min.
5. Carefully check whether the instrument and parts of the electronic truck scale are normal and intact, especially check whether there is debris stuck on the scale table and other parts.
6. The car should drive straight on the electronic truck scale at a speed of less than 5km/h and brake gently; Cars should be parked as far as possible in the center of the electronic truck scale.
7. After the car is stable, start reading the display and record or print.
8 electronic truck scale is strictly prohibited overload weighing.
9. When not in use after weighing, turn off the electronic truck scale and cut off the power supply.
10. Clean the electronic truck scale regularly, especially the items scattered on the scale platform should be cleaned up in time.
11 electronic truck scale if there is a fault, to immediately stop using and report to professional repair, after verification can continue to use.
冀公網安備 13050902000085號