The use of the software has a lot of attention, including small knocking at the door when in use are all need to know and understand, weighing software is such a kind of software system, small make up for you now as matrix weighing software read the note about the use of electronic rail weighbridge, first should understand the point is, the use of this machine is need of personnel to be responsible for. In addition, in use and in use also often appear the following problems:
1. The electronic track scale installation and debugging must be verified by the track scale metering station, and can be put into use after obtaining the metrological verification certificate. Then periodic verification should be carried out on time to ensure that it is used within the validity period of the verification certificate.
2. Before use, pay attention to check whether the scale is flexible, whether the supporting instruments are connected to each other correctly, whether the connector is firm, and whether the power supply voltage meets the requirements.
3. Before use, the weighing display control instrument and weighing sensor should have enough preheating time, and the sensor with constant temperature device should ensure long-term power.
4. The sum of the metering train and the load shall not exceed the larger weighing of the track scale. This point and loadometer software in the use of some similar matters to pay attention to.
5. When passing the weighing platform, the metering train must pass the weighing platform at a uniform speed according to the specified speed. In general, it is not allowed to accelerate or brake on the weighing platform.
6. After each metering train passes, check the return to zero of the weighing display control instrument in time, confirm the weighing data, and sort out the printed records.
7 in the use of electronic track scale found abnormal or out of alignment phenomenon, should be immediately stop using, cut off the power supply and notify the maintenance personnel to check and repair, not to disassemble at will, so as to avoid accidents; After repair, it should be used after being checked and qualified.
8. The electronic track scale with self-checking and self-checking system should be self-checking and self-checking once a day, in order to reduce errors and ensure the weighing accuracy.
9. After the use of the electronic track scale, the switch knob should be moved to the closed position, and cut off the power supply.
冀公網安備 13050902000085號